Skip to content
IEMI Labs

SpillGuard AI

Detect floor spills and falls in seconds, before someone gets hurt

In development · Ships Q2 2027Pilot applications open
From$399per edge box

Software: $199–$299 per month per store

Pilot deployments begin ahead of general availability (Q2 2027). The optional $49 pilot-slot deposit is fully refundable.

spill 0.91REC ● EDGE · ON-DEVICEHAILO-8LLATENCY < TARGET · NO CLOUD UPLOAD
Product render — final design may vary

Real-time 3D render · drag to rotate · final design may vary

What it is

A small ceiling-mounted camera that watches shop and warehouse floors.

What it does

  • Spots spills and debris in seconds
  • Detects when someone falls
  • Alerts the nearest staff member
  • Tracks clean-up times and hotspots

Who it's for

Supermarkets, restaurants, hospitals, warehouses, airports and malls.

Look inside

What's inside SpillGuard AI

Keep scrolling: it opens up in real time to show the parts that do the work.

spill 0.91REC ● EDGE · ON-DEVICEHAILO-8LLATENCY < TARGET · NO CLOUD UPLOAD
Product render — final design may vary

Overview

SpillGuard AI watches floors continuously and detects water and oil spills, debris and fallen persons in real time. It runs on a 10 cm ceiling-mount camera or on your existing cameras, and instantly alerts staff by app, warning light or PA so hazards are cleaned up before anyone slips.

  • Detects water, oil and liquid spills on reflective and patterned floors
  • Fall detection for staff, patients and customers
  • Instant alerts to staff app, warning lights or PA
  • Works with existing cameras or a 10 cm PoE ceiling dome

The problem

Slips, trips and falls are among the most common causes of workplace injury and public-liability claims in supermarkets, restaurants, hospitals and warehouses. Spills are often discovered only after an incident, and floor walks are infrequent and hard to prove. A person who falls in a quiet aisle or corridor can go unnoticed for minutes.

Use cases

Supermarkets and retail aisles

Find spills from broken bottles, freezers and produce misting before customers slip.

Restaurants and kitchens

Monitor kitchen floors and walkways for grease and water hazards.

Hospitals and care homes

Detect patient falls in corridors and common areas and alert nursing staff immediately.

Warehouses and loading areas

Spot oil leaks from forklifts and liquid spills from damaged goods.

Airports, malls and hotels

Keep high-traffic public floors safe and log response times for compliance.

Proof of care

Keep timestamped records of detection, alert and clean-up for safety audits and claims defence.

How it works

  1. 1

    Monitor

    SpillGuard cameras or your existing CCTV monitor floors continuously.

  2. 2

    Detect

    On-device segmentation models find spills and debris; pose models detect a person on the floor.

  3. 3

    Verify

    Detections are confirmed over several seconds to filter shadows, reflections and staff activity.

  4. 4

    Alert

    Staff receive an instant alert with a snapshot and location; optional warning lights or signage activate.

  5. 5

    Close the loop

    Staff mark the hazard cleared and the dashboard records response time for reporting.

In the app

SpillGuard Console

The SpillGuard staff app pushes alerts with snapshots and locations; the dashboard tracks hazards, response times and hotspots across every store or site.

  • Instant hazard alerts with snapshot
  • One-tap acknowledge and clear
  • Response-time reporting
  • Hotspot heat maps
  • Escalation rules by zone and shift
  • Audit-ready incident log
SpillGuard ConsoleLive
Store 041 · Aisle 7 · Live
Open hazards
1
Avg response
2m 40s
Cameras live
18 / 18
Cleared today
6
Liquid spill 0.93Broken glass 0.81Shopper 0.97Wet-floor sign 0.90● RECCAM 03 · ON-DEVICE11:07:07
  • Spill · Aisle 711:07

    Liquid pool ~0.6 m², near dairy chiller

  • Debris · Entrance10:52

    Cardboard on walkway, cleared in 1m 50s

  • Fall check · Aisle 310:21

    Person on floor 4 s, stood up — no action

  • Spill cleared · Aisle 1209:58

    Response time 2m 12s

App preview with sample data — interface in development

AI capabilities

Runs on-device · Hailo-8L

Spill detection

Segments liquid spills (water, oil, milk and more) on tiles, concrete and vinyl.

Model: YOLO11-seg fine-tuned on spill dataset + SAM2-assisted labelling

Person fall detection

Detects falls and people lying on the floor from body pose and motion.

Model: YOLO11-pose + temporal fall classifier (LSTM)

Debris and obstruction detection

Detects dropped goods, broken glass areas and trip hazards in walkways.

Model: RT-DETR object detector

False-alarm suppression

Learns normal floor appearance per camera to ignore reflections and lighting changes.

Model: Background model + anomaly scoring

Wet-floor sign recognition

Recognises when a hazard has been marked with a caution sign.

Model: MobileNetV3 classifier

Hardware & target specifications

Targets for production units. Subject to change during development.

Hardware

SpillGuard AI hardware
AI processorHailo-8L (13 TOPS) or Kendryte K230 (6 TOPS)
Camera1080p wide-angle dome (110° FOV) or existing CCTV over RTSP
SensorsAmbient light sensor
ConnectivityEthernet (PoE) · Wi-Fi 6 · Relay output for warning lights · RTSP input for existing cameras
PowerPoE (802.3af) or 12 V DC, 5–10 W
EnclosureWhite polycarbonate ceiling dome with tamper-resistant mount
Dimensions10 × 10 × 4 cm (ceiling mount)
Weight~350 g
Ingress ratingIP54 (indoor, washdown-tolerant)

Vision

Vision target specifications
Camera1080p wide-angle, 110° FOV
Existing camerasUp to 4 RTSP streams per dome / 16 per edge box
CoverageUp to ~60 m² floor area per camera
Low lightDown to 1 lux

AI and alerts

AI and alerts target specifications
ProcessorHailo-8L (13 TOPS) / K230 (6 TOPS)
DetectsLiquid spills, debris, falls
Time to alertUnder 10 s (target)
OutputsApp, SMS, email, relay light, webhook

Power and network

Power and network target specifications
PowerPoE or 12 V, 5–10 W
NetworkEthernet / Wi-Fi 6
Storage32 GB for event snapshots
UpdatesSigned OTA updates

Physical

Physical target specifications
Size10 × 10 × 4 cm
MountCeiling or wall
RatingIP54
Operating temp.0 °C to 45 °C

Built with

The real parts inside

Proven, off-the-shelf components our prototypes are built on. Final production parts may differ.

Raspberry Pi 5 (reference photo)

Raspberry Pi 5

Main computer for our edge boxes

Photo: SimonWaldherr,CC BY 4.0, via Wikimedia Commons · AI overlay added

Raspberry Pi AI HAT+ (Hailo AI accelerator) (reference photo)

Raspberry Pi AI HAT+ (Hailo AI accelerator)

Runs the vision models on the device

Photo: SparkFun Electronics,CC BY 2.0, via Wikimedia Commons · AI overlay added

Standard CCTV cameras (bullet and dome) (reference photo)

Standard CCTV cameras (bullet and dome)

The cameras you already have — we connect to them

Photo: Myotus,CC BY-SA 4.0, via Wikimedia Commons · AI overlay added

Reference photos of commercially available components. IEMI Labs is not affiliated with or endorsed by their manufacturers. Photo credits

In the box

Planned contents

  • SpillGuard AI ceiling dome
  • Mounting plate and tamper screws
  • PoE injector (single-unit kits)
  • Optional warning-light relay cable
  • Quick-start guide

Software & app

The SpillGuard staff app pushes alerts with snapshots and locations; the dashboard tracks hazards, response times and hotspots across every store or site.

  • Instant hazard alerts with snapshot
  • One-tap acknowledge and clear
  • Response-time reporting
  • Hotspot heat maps
  • Escalation rules by zone and shift
  • Audit-ready incident log

Integrations

  • Existing CCTV via RTSP / ONVIF
  • Warning lights and beacons via relay
  • Microsoft Teams, Slack and SMS
  • Nurse-call and facility systems via webhook
  • Incident-management tools via REST API

Pricing

Hardware: $399 per edge box

Software: $199–$299 per month per store

Uses your existing cameras through one edge box. Optional SpillGuard domes for areas without coverage are $99 each.

Store

$399 + $199/mo

For a single store, restaurant or ward.

  • Up to 8 existing cameras
  • Spill and fall alerts
  • Staff app
  • 90-day incident log

Site

$399 + $299/mo

For larger stores, hospitals and warehouses.

  • Up to 16 existing cameras
  • Warning-light integration
  • Escalation rules
  • Response-time reports

Enterprise

Custom

For multi-site chains and health systems.

  • Multi-site dashboard
  • API and SSO
  • Optional $99 domes
  • Priority support and SLA

Indicative launch pricing in USD, excluding taxes and shipping. Final pricing is confirmed before any balance is charged.

Estimated impact

Time to detect a spill
from tens of minutes to under 10 seconds (est.)
Slip-and-fall incidents
up to 30% fewer (est.)
Manual floor-walk effort
up to 50% less (est.)

Illustrative estimates based on internal modelling and typical deployments; not measured results. Actual outcomes depend on site conditions and usage.

Designed for

  • Supermarkets and grocery chains
  • Restaurants and quick-service chains
  • Hospitals and care homes
  • Warehouses and distribution centres
  • Airports, malls and hotels

Roadmap

Target milestones. We will email reservation holders and pilot partners as they change.

  1. Q4 2026

    2027 Pilot Program applications open; reference hardware running on customer RTSP cameras

  2. Q1 2027

    Pilot deployments at selected sites; model fine-tuning on site data

  3. Q1 2027

    EVT / DVT hardware builds, thermal and 24/7 reliability testing

  4. Q2 2027

    General availability and first production shipments of SpillGuard AI

  5. Q3 2027

    Additional hazard classes (blocked exits, smoke) planned via software update

2027 Pilot Program

Pilot SpillGuard AI on your site

Pilot partners get early hardware, direct engineering support and preferential launch pricing. Tell us about your site and cameras.

How the pilot program works

We use your details only to respond to this request. See our privacy policy.

SpillGuard AI FAQ

General FAQ
Do I have to pay to join the 2027 Pilot Program?

No. Applying is free and carries no obligation. If you want to hold a pilot slot, you can place an optional $49 deposit. It is fully refundable any time before shipment — email hello@iemilabs.com or use the refund link in your confirmation email — and it is credited in full against your purchase if you go ahead.

Is my data processed on the device?

Yes. Video is analysed on the camera or edge box and is not streamed to the cloud. Only alerts with a single snapshot are sent to staff, and snapshots can be blurred to hide faces.

Can I use my existing cameras?

Yes, if they view the floor at a reasonable angle and provide an RTSP or ONVIF stream. Where coverage is missing, add a SpillGuard dome.

How does it handle shiny floors and reflections?

Each camera learns its normal floor appearance and confirms detections over several seconds, which filters reflections, shadows and cleaning staff. Pilot sites help us tune sensitivity per zone.

How is it installed?

Domes mount on the ceiling with a single PoE cable. Existing cameras are added in the web setup wizard. Most stores are live within a day.

What network connection does it need?

Ethernet with PoE or Wi-Fi 6, plus an internet connection for app alerts. Relay outputs work locally even if the internet is down.

What warranty will it come with?

We are planning a 2-year limited hardware warranty covering manufacturing defects, with advance replacement for pilot and business customers. Final warranty terms will be published before shipping begins.

Related products

ParkSense AIcar 0.94bay 12 · free
Render · final design may vary
VisionShips Q2 2027

ParkSense AI

A palm-sized edge box that plugs into your existing parking cameras.

  • Counts free bays in real time
  • Flags overstays and wrong parking
  • Guides drivers to open spaces

From $499 per edge box (waived on a 12-month plan)

Pilot
LoadingDock AIpallet ×4label · OCR
Render · final design may vary
VisionShips Q3 2027

LoadingDock AI

A rugged box the size of a paperback that links to your loading-dock cameras.

  • Counts pallets in and out
  • Reads labels and QR codes
  • Spots damaged or torn wrap

From $990 per 2-door kit (waived on a 12-month plan)

Pilot
ShelfScan AIgap · aisle 7price ✓
Render · final design may vary
VisionShips Q2 2027

ShelfScan AI

A tiny cube camera that clips onto a shop shelf or ceiling.

  • Spots empty and low shelves
  • Finds products in the wrong place
  • Catches wrong price tags

From $299 per camera

Pilot

SpillGuard AI

From $399 · Ships Q2 2027

Apply